Gripit Fixings – Again, these have a used for dry-lined walls owing the shallow dept of the plug, which allows it to be inserted and fit in between the plasterboard and the solid wall behind. This would not be possible with conventional wall anchors which usually will not fit in the space.
I now recommend fixing the bracket to the TV. This is where the preparation you have made with the VESA investigation prior to purchasing the TV wall mount comes into play. When doing this it’s important to picture where the TV input/ output cable connections will leave the TV. What I mean by this is that you have to be sure that these will fit between the wall and the back of the TV when the TV is installed on the wall. If they do not, it could push the bottom of the TV out so that it faces up or may not allow the TV to be placed on the wall bracket altogether.
What I recommend doing is to connect the TV cables into the TV before it’s mounted onto the wall. Once in position you can with a tape-measure measure the distance that these with the bend radius will come away from the back of the TV. With this measurement you will know how far that the bracket needs to be stood away from the TV. This is usually done with longer fixing screws and spacers that come with the TV bracket. If not, you can always purchase your own longer screws and build up the space with washers. This isn’t usually much of a problem as most TV manufacturers have built their TV’s so that the TV connections leave parallel to the wall rather than at a right angle so that the TV can be positioned very close to the wall.
Tip- If the bracket that you are installing allows a further adjustment up/ down or side/ side, I recommend fixing in the middle. This means that if for whatever reason that the TV has not come out in the right place,the TV height etc can be(slightly) adjusted without having to drill new holes in the wall.
Once you have the bracket mounted to the TV, I recommend measuring between the bottom of the bracket and the bottom of the TV (or top to top) so that you have a reference to use to mount your TV at the correct height.
Spend some time on this step as the last thing you will want to do is have to drill all new holes because the TV is too low/ too high etc. Usually people mount TV’s too high and get neck ache! Think about where you’re going to viewing the TV from. For instance, in the lounge you’re likely to be sitting down so you will want it lower down, in the kitchen you may want it higher and in a bedroom you may want it higher up to reflect that you will belaying down when watching it. Once you have identified the height of the TV,with a pencil or something similar mark this on the wall so you have it for reference. Personally, I recommend marking 5cm/ 2 inches below the top of the TV so that the mark that you have made is hidden behind the TV when it is on the wall.
I always get asked, what height for my TV? The answer is quite simple, wherever you want it. But the “recommended” height is, when you’re sitting down in your viewing position that your eye level is between half way and one third of the TV height. I must say, personally I prefer this a little bit higher. Apart from the height, you will want to consider where about(right to left) that you want the TV on the wall. Usually you will want this centre of the wall, but you may want to centre it to your sofa or bed instead.
Put the dustsheets down first! Sometimes brick dust comes out black and can be difficult to get off of light-coloured carpets. I also use a vacuum/hoover to catch dust as I drill. You may need a second person to hold this for you.
Once you have identified the position and height that you wish to mount your TV. You will need to begin fixing the bracket. Before you do this, I recommend with a metal/ cable detector making sure that there are no cables or pipes where you’re going to be drilling. The last thing you will want is to burst a pipe of drill through a cable, these could be very expensive things to repair. Another tip for identifying existing electrical cable routes is to visualise across from nearby electrical points both horizontally and vertically as these are normally where the cables run. I say normally because you can’t be sure that whoever wired your property has adhered to these guidelines. If you want to be extra careful you could loosen off the nearby electrical sockets to actually look which way the cables enter into the wall-plate sockets. Be very careful when doing this, I advise switching off the electric supply before trying this.
1- Using your mark on the wall as a reference and the measured distance between the edge of the TV and the beginning of the wall bracket that you identified when fixing the bracket to the TV. With a level,mark the TV wall bracket fixing positions.
2- Drill the fixing holes. I recommend wrapping apiece of insulating tape or something similar around your drill bit so that you drill to the correct depth. Go ever so slightly deeper to be on the safe side.
4- Thread bolts (with washers) through fixing holes and finger tighten into plugs in wall. If you get two bolts in finger tight this will usually be enough to free up your hands.
5- Tighten bolts in place with spanner/socket/screw-driver depending what fixings you have. If using a power tool for this task I recommend stopping just before the end and finishing off by hand. Make sure that bracket is level.
How are the cables going to be managed? Are you going to feed them behind the plasterboard, bury them in the wall, install a surface mounted trunking or just leave them loose?
Where is the nearest mains electrical point? How are you going to get power to your wall mounted TV? How far away is this? Will you need to order a longer cable or are you going to install a mains socket/ fused spur behind?
Where is the rest of your AV equipment going to live when the TV is on the wall? Are the cables, like the HDMI cables going to be long enough? Will you need to order longer ones?
I’m sure you will appreciate that this is quite a broad subject in itself and I cover this in an older blog – How To Hide TV Cables/ Wires. You may also want to consider purchasing or installing right-angle cables/adapters that remove the bend radius of the cables themselves and install the TV as close to the wall as possible. It’s also worth noting that it can be tricky to insert the cables when the TV is on position on the wall, so it may help to get these plugged in behind the TV first and then lift the TV in position.
The modern world of entertainment revolves around smooth, high-definition flat-screen televisions that adorn our living spaces. Mounting your TV on the wall with a TV bracket not only enhances the aesthetics of your room but also maximizes your viewing experience. If you’re looking to free up floor space and achieve that cinematic vibe in your home, this step-by-step guide to TV bracket installation is here to help.
Attach the bracket securely to the wall using the provided screws. If the bracket didn’t come with screws or anchors, use appropriate ones for your wall type (wooden or concrete).
TV RepairOnce everything is in place, check the stability of your wall-mounted TV. Give it a gentle shake to ensure its securely attached to the bracket. Use a spirit level to confirm that the TV is perfectly level both horizontally and vertically.
Connect your TV to the power source, and any other devices you have (such as a cable box, gaming console, or sound bar). Power on the TV and make sure everything is working as expected. Adjust the viewing angle if necessary.
TVs have become an essential part of our lives, and having the right TV mounting service is crucial to enjoy the best viewing experience. Whether you are upgrading your home entertainment system or moving into a new home, getting the right TV mounting service is essential to ensure a smooth and hassle-free installation process.
With the abundance of TV mounting services in the market, it can be overwhelming to choose the right one. In this guide, we'll provide you with everything you need to know about TV mounting services, including how to choose the right service, the benefits of professional TV mounting, and frequently asked questions to help you make an informed decision.
Experience and Expertise: Professional TV mounting services have years of experience and expertise in handling all types of TV installations. They have the necessary tools, equipment, and knowledge to ensure a smooth and secure installation process.
Safety: Mounting a TV can be dangerous, especially if you are not familiar with the process. Professional TV mounting services have the necessary safety equipment and training to ensure that the installation is safe and secure.
Save Time and Money: Trying to mount a TV yourself can be time-consuming and may result in costly mistakes. Professional TV mounting services can save you time and money by ensuring that the installation is done right the first time.
Customized Solutions: Professional TV mounting services can provide customized solutions based on your specific needs and preferences. They can help you choose the right mounting bracket, hide cables and wires, and provide additional services like soundbar installation.
Reputation: Look for TV mounting services with a good reputation in your area. Read online reviews, ask for referrals from friends and family, and check the company's credentials and licenses.
Experience and Expertise: Choose a TV mounting service with years of experience and expertise in handling all types of TV installations. They should have the necessary tools, equipment, and knowledge to ensure a smooth and secure installation process.
Price: While price should not be the only factor, choose a TV mounting service that offers fair and transparent pricing. Avoid companies that have hidden fees or charges.
Wall Mounting: Wall mounting is the most common type of TV mounting service. It involves mounting the TV on a wall using a mounting bracket. Wall mounting can be done on different types of walls, including drywall, concrete, and brick.
Ceiling Mounting: Ceiling mounting is another option if you want to save space or have a unique room layout. Ceiling mounting involves mounting the TV on a ceiling using a ceiling mount bracket.
Fireplace Mounting: Fireplace mounting is a popular option if you want to add a focal point to your living room. It involves mounting the TV above a fireplace using a specialized mount bracket that protects the TV from heat.
Outdoor Mounting: Outdoor mounting is an option if you want to enjoy your favorite shows and movies while spending time outside. It involves mounting the TV on an outdoor wall or using a portable stand.
Your new TV shipped with a stand, but you really want to mount it on the wall. While it looks okay proudly standing alongside your game console or Blu-ray player, it's the type and size of TV that was made for a cinematic experience.
